Revision as of 20:01, 13 December 2010

Required Hardware

Beagleboard Rev C4

GWC Technology HE2440 USB 2.0 4-Port Hub with Ethernet Adapter

Two USB cables

Ethernet cable

2.5A 5V switching power adaptor (For example DVE DSA-15P-05 US)

Arduino Nano

Solderless breadboard

Note: Yes, both the host USB connector (for communication) and client USB connector (for power) on the Beagleboard are connected to the hub!

Software

For the simplest use, we recommend installing Firmata onto the Arduino nano. This can be done directly from the Beagleboard by running the Arduino software application.

Revision as of 20:01, 13 December 2010 view source Eberdahl (talk \| contribs) 1,924 edits No edit summary ← Older edit		Revision as of 20:01, 13 December 2010 view source Eberdahl (talk \| contribs) 1,924 edits →Required hardware Newer edit →
Line 1:		Line 1:
	= Required ~~hardware~~ =		= Required Hardware =
	* [http://beagleboard.org/Hardware Beagleboard Rev C4]		* [http://beagleboard.org/Hardware Beagleboard Rev C4]