Neuromusiclab: Difference between revisions
| Line 1: | Line 1: | ||
=Good practices for the Neuromusic Lab= | |||
==Lab Meetings== | |||
* sign up for presenting in lab meetings [https://ccrma.stanford.edu/wiki/Neuromusiclab/labmeeting] | * sign up for presenting in lab meetings [https://ccrma.stanford.edu/wiki/Neuromusiclab/labmeeting] | ||
* Link to Picton via Stanford Library [https://ebookcentral.proquest.com/lib/stanford-ebooks/detail.action?docID=1886781] | * Link to Picton via Stanford Library [https://ebookcentral.proquest.com/lib/stanford-ebooks/detail.action?docID=1886781] | ||
* Takako @ Stanford: Jan. 24- Feb. 7 + Feb. 21 - March 23 | * Takako @ Stanford: Jan. 24- Feb. 7 + Feb. 21 - March 23 | ||
==Lab Setup== | |||
===General Information=== | |||
<p> | <p> | ||
As of Jan. 12, 2018, the KVM switch in the control room and the booth are working for the stim and mac computers! The motor computer has not been tested at this point. Please document thoroughly if recabling is necessary. | As of Jan. 12, 2018, the KVM switch in the control room and the booth are working for the stim and mac computers! The motor computer has not been tested at this point. Please document thoroughly if recabling is necessary. | ||
</p> | </p> | ||
===Default Mode=== | |||
; Stim | ; Stim | ||
: DVI output from Stim connects to Control KVM switch | : DVI output from Stim connects to Control KVM switch | ||
| Line 19: | Line 19: | ||
: VGA output not used | : VGA output not used | ||
==Capping== | |||
*Brush participant scalp with stiff brush | *Brush participant scalp with stiff brush | ||
*NuPrep gel can clean each electrode site after cap is velcroed | *NuPrep gel can clean each electrode site after cap is velcroed | ||
| Line 26: | Line 26: | ||
*Keep connector away from water - use a ziplock bag around the connector and hook it above the paper towel dispenser. | *Keep connector away from water - use a ziplock bag around the connector and hook it above the paper towel dispenser. | ||
==Data Analysis== | |||
* SSP tricks | * SSP tricks | ||
* | * | ||
Revision as of 23:59, 12 January 2018
Good practices for the Neuromusic Lab
Lab Meetings
- sign up for presenting in lab meetings [1]
- Link to Picton via Stanford Library [2]
- Takako @ Stanford: Jan. 24- Feb. 7 + Feb. 21 - March 23
Lab Setup
General Information
As of Jan. 12, 2018, the KVM switch in the control room and the booth are working for the stim and mac computers! The motor computer has not been tested at this point. Please document thoroughly if recabling is necessary.
Default Mode
- Stim
- DVI output from Stim connects to Control KVM switch
- HDMI output from Stim connects to Booth KVM switch
- note: this particular cable has the label 'stim'.
- VGA output not used
Capping
- Brush participant scalp with stiff brush
- NuPrep gel can clean each electrode site after cap is velcroed
Cleaning
- Sanitize the comb/brush after every use: put them in the plastic tub with warm water + 1 Tablespoon dish soap + 1 Tablespoon vinegar (under the sink). Let sit for ~1 hour before rinsing and drying. (A good time to do this is while the participant is in the booth).
- Keep connector away from water - use a ziplock bag around the connector and hook it above the paper towel dispenser.
Data Analysis
- SSP tricks