HELiX

April 1 - April 5, 2019

For this course MUSIC 220c I propose to design and implement an Augmented Flute that can act as a controller for a variety of music making and performance applications.

Motivation

Sensory Percussion by Sun House

In October of 2016 I attended the SF Music Tech Submit, discovering many new innovations and designs in the music tech industry. However, Sensory Percussion by Sun House stood out the most to me. The idea was to have the ability to play and trigger electronic sounds and samples through the acoustic drum itself. No external drum pad was needed. This allowed drummers to explore electronic music production without having to go through the learning process of a whole new system or apparatus. They could intuitively and easily create electronic tracks and pieces based on their language and knowledge of playing the drums. An example of how the system works can be found here:

https://www.youtube.com/watch?v=xNASyYWshQc

After hearing a live demo of this system all I could think of was that I wanted one, but for my flute. So for this course I plan to design and build an augmented flute that will allow me to easily and intuitively create electronic music through my existing knowledge and facility of playing the flute.

April 8 - April 12, 2019

Requirements

This week I began laying out the requirements for HELiX:

1) Needs to respond to the keys being pressed on the flute in order to determine what note is being played. From there, different electronic samples or parameters can be mapped to it.

2) Need to be responsive to various articulations of the user (i.e. single, double and triple tonguing).

3) Needs to be wireless, with more than 80% of sensor and DSP processing being done on the micro-controllers connect to the flute.

4) Needs to be abled to be networked to different devices on a particular network or across the internet. This would allow a proof of concept that this system could eventually work in a large Internet of Things (IoT) system.

5) Needs to be self powered and rechargeable.

Articulation Studies

I started out by conducting several articulation studies of single and triple tonguing articulations. I recorded small snippets of my self playing concert flute and alto flute utilizing these articulations. The librosa library in python (https://librosa.github.io/librosa/) was used to perform the Harmonic and Percussive Source Separation (HPSS) on these recording. Below are examples of the resulting articulation spectrograms on concert flute:

Here are some examples of the alto-flute articulation spectrograms and how they relate to onset detection graphs in librosa:

Generally, it can be observed that there are some complication when trying to detect a triple tonguing articulation as it is going by to fast for the system to recognize. In addition, through comparing the spectrograms to the onset detection graphs it was also found that vibrato was mis-interpreted as an onset articulation.

April 15 - April 19, 2019

This week I began to explore and work with various micro-controllers and sensors. These include:

Boards

1) Bela Board https://bela.io/

2) Arduino https://www.arduino.cc/

3) Rasberry Pi https://www.raspberrypi.org/

The one of most interest is the Bela Board due to its advertised low latency speed of 1ms of playback audio. The Bela board includes an audio cape that lies on top of the Beaglebone Black board. The audio cape was found in the MAX lab and I have started to experiment with it. If the Bela board does not work I plan to use a combination of the Arduino and Rasberry pi for the handling of sensor and DSP processing.

Sensors

1) Force Sensors 2) Buttons

In order to detect what keys are being presssed on the flute I plan on using force sensors on top of the keys. When pressed the force sensors should provide a specific value that would signal that the key has been pressed. I have begun to experiment with these sensors. If the force sensors do not work the back up plan is to use push buttons sensors instead.

April 22 - April 26, 2019

Update

Continued to experiment with the Bela Board. I was able to run the example code through the browser IDE. A good amount of time was used this week researching how to connect the Beaglebone to the audio cape after the SD card was flashed with the correct Bela image. Apparently, the reset button has to be pressed down on the Beaglebone black at start up so that it can use the Bela image on the SD card. The Audio cape must be off the Beaglebone Black during this process. After the Bela image has been booted to the Beaglebone Black the audio cape can then be attached to the Beaglebone black.

April 29 - May 3, 2019

Update

Built and soldered components to build an air microphone from the MUSIC 220a website:

https://ccrma.stanford.edu/courses/220a/resources/MicBuilding.pdf

I was able to connect the microphone to the Bela Board and see the audio data going through the board in real-time on the on board oscilloscope. In addition, I experimented with FFT examples in Pure Data (Pd) that would eventually be uploaded to the board. However, due to the time constraints and the learning curve associated with the Bela board, I will be be using the Arduino and Rasberry pi combination moving forward.

May 6 - May 10, 2019

Update

I installed all python dependencies for this project: Numpy, Scipy, librosa, and pyaudio. Also was able to install Wekinator on the Rasberry pi (WekiMini and WekiInputHelper). Was able to successfully implement the HPSS algorithm in realtime using the pyaudio and librosa libraries. I was able to separate the harmonic and percussive elements of the signal by:

1) Taking the STFT of each incoming buffer

2) Calling the librosa.decompose.hpss()

....