Difference between revisions of "MaxKit"
From CCRMA Wiki
| Line 1: | Line 1: | ||
| − | + | Here is what is in your MaxKit: | |
| + | |||
| + | 1 Arduino Nano 3.0 | ||
| + | 1 Breadboard | ||
| + | 1 Multimeter | ||
| + | 1 USB cable | ||
| + | |||
| + | 1 3-axis Accelerometer | ||
| + | 1 Sharp Distance Sensor | ||
| + | 1 Wireharness | ||
| + | 1 Force Sensing Resistor | ||
| + | 1 Flex sensor | ||
| + | 1 Color Button switch | ||
| + | 1 Tact switch | ||
| + | |||
| + | 1 Piezo sensor | ||
| + | 2 Knob pots | ||
| + | 2 Red LEDs | ||
| + | 2 Green LEDs | ||
| + | 2 Yellow LEDs | ||
| + | 1 RGB LED | ||
| + | |||
| + | To be added: jumper wires, lever switches | ||
Revision as of 01:02, 29 September 2009
Here is what is in your MaxKit:
1 Arduino Nano 3.0 1 Breadboard 1 Multimeter 1 USB cable
1 3-axis Accelerometer 1 Sharp Distance Sensor 1 Wireharness 1 Force Sensing Resistor 1 Flex sensor 1 Color Button switch 1 Tact switch
1 Piezo sensor 2 Knob pots 2 Red LEDs 2 Green LEDs 2 Yellow LEDs 1 RGB LED
To be added: jumper wires, lever switches
