Neuromusiclab

Good practices for the Neuromusic Lab

Lab Meetings

Lab meetings typically occur once per week. The usual meeting time for Winter 2018 is Friday at 1pm. Check the linked meeting schedule for updates. <p>

• Links
  • Sign up for presenting in lab meetings [1]
  • Picton via Stanford Library [2]

Takako's Schedule

• Takako @ Stanford: Jan. 24- Feb. 7 + Feb. 21 - March 23

Booking Lab Time

<p> Use the CCRMA room-booking system with your CCRMA credentials to reserve lab time. [3]

Lab Setup

General Information

<p> As of Jan. 12, 2018, the KVM switch in the control room and the booth are working for the stim and mac computers! The motor computer has not been tested at this point. Please document thoroughly if recabling is necessary.

Default Mode

Stim

DVI output from Stim connects to Control KVM switch

HDMI output from Stim connects to Booth KVM switch

note: this particular cable has the label 'stim'.

VGA output not used

Capping

• Brush participant scalp with stiff brush
• NuPrep gel can clean each electrode site after cap is velcroed

Cleaning

• Sanitize the comb/brush after every use: put them in the plastic tub with warm water + 1 Tablespoon dish soap + 1 Tablespoon vinegar (under the sink). Let sit for ~1 hour before rinsing and drying. (A good time to do this is while the participant is in the booth).
• Keep connector away from water - use a ziplock bag around the connector and hook it above the paper towel dispenser.

Data Analysis

• SSP tricks