Difference between revisions of "SLOrk/Instruments/SoundBounce"

Revision as of 15:27, 19 May 2009

This instrument uses a virtual bouncing ball and a physical accelerometer-based control to control sounds.

Setting up the iPod Touch:
1. in ipod Settings, select the correct network, e.g. SlorkNet
2. launch TouchOSC on the ipod
3. in TouchOSC settings set host to the IP address or name of your laptop
4. note the IP address of the iPod touch.

Setting up the chuck patch (for players):
1. open chuckball-catch.ck
2. on line 14 set player_number to which player you are (eg 0 for player 1, 1 for player 2, ..., 3 for player 4.)
3. on lines 18-22 set the IP addresses or machine names for all four players and the conductor.
4. on line 25 set the IP address of your iPod Touch.

Setting up the chuck patch (for the conductor):
1. open conductor-sender.ck
2. on lines 9-12 set the IP addresses or machine names for the four players.
3. on line 21 set the IP address of your iPod Touch.

Start the max patch: launch chuckball-catch-max
Start the chuck patch: start the shred for chuckball-catch.ck
Make sure they are all talking: You should see accelerometer data appearing in the max patch, and bounce and throw gestures should be recognized

@@ Line 24: / Line 24: @@
 === Running (for players) ===
-# Start the max patch...
+# Start the max patch: launch chuckball-catch-max
-# Start the chuck patch...
+# Start the chuck patch: start the shred for chuckball-catch.ck
-# Make sure they are all talking...
+# Make sure they are all talking: You should see accelerometer data appearing in the max patch, and bounce and throw gestures should be recognized
 === Running (for the conductor) ===